The RAIDcase IDE RAID 1drive mirroring enclosure is both easy to install and easy to use. Ensure continuous, real time, up to the minute backup and eliminate potential downtime. DPS-Arco's advanced
power and bus management allow you to hot swap
drives and the RAIDcase's two removable drive caddies make drive replacement a snap.
If a drive fails, there is no need to shut
down the computer. Simply slide out the
failed drive, slide in a replacement and
the RAIDcase’s DupliDisk 3 technology
will automatically re-mirror your data.
A key lock on each drive caddy provides
complete security. The RAIDcase is the ideal
solution to protect your Parallel ATA (IDE) drives. (For SATA drive enclosures, please click on our SATA RAID controllers and enclsoures listed in the blue navigation bar.)
| System
Features |
|
| ATA 100/66/33, E-IDE AND
UDMA 100/66/33 |
Operating system and hardware independent |
| Two hot-swappable drive caddies |
Native utility for DOS, Linux, Windows
NT4 and 98 & higher |
| Automatic failover |
DOS utility for all other PC operating
systems |
| Mounts in two 5.25”
Drive Bays |
LED drive operation indicators and
audible alarm |
| True background rebuild |
Supports drives up to 144 petabytes |
| Remote notification (e-mail) |
Serial port for remote administration |
| Supports all 3.5” IDE hard drives
. |
All necessary cables included |
| |
|
| |
|
| Specifications |
|
| Drive
Interface |
DE/E-IDE/UDMA |
| Data
Path |
IDE/E-IDE/UDMA
Defined by host controller |
| Hard
Disk Interface |
Cable
18 inches maximum
80
Conductor - 40 pin connector |
| Electrical
Input |
Voltage
5V DC (+/- 5%)
Current
450ma operating, 600ma peak |
| Physical
Dimensions |
Length:
8.50"
Width: 5.75” |
| Operating |
Temperature:
0 to 50 degrees C
Humidity:
8 to 87% non-condensing |
| MTBF |
MIL-HDBK-217 = 580,383
hours
Bellcore rating = 2,695,418 hours |
| EMC/EMI
Compliance |
FCC class B certification
CE certification |
