GET UP-FRONT SATA RAID 1 MIRRORING PROTECTION.
The EzRaid DD4 3.5 " Bay Mount controller installs in an external 3.5" drive bay and allows you to quickly and easily set up a RAID disk mirroring system on your computer using Serial ATA (SATA) drives.
With the EzRAID DD4 3.5" Bay Mount SATA RAID 1 disk mirroring controller, the state of your mirrored drives is immediately visible at all times. Front panel LEDs and an audible alarm alert you instantly to any disruption in drive operation or break in the mirror. Up-front access to the alarm button makes it easy to quickly disarm or reset the siren once a problem has been recognized.
Featuring our easy to use DupliDisk4 (DD4) RAID mirroring technology, the Bay Mount fits perfectly into any standard 3.5" external drive bay. It's the ideal solution for mirroring your SATA drives where no free bus slot or 5.25" external drive bay are available.
See our 5.25" EzRAID Bay Mount SATA RAID 1 controller if you have no free 3.5" bays.
Or, if your computer is outfitted with IDE drives, please select one of our (DD3) IDE mirroring controllers from the blue navigation bar on the left.
Installing the 3.5" Bay Mount RAID 1 controller is a simple matter of slipping the RAID controller into an available 3.5" drive bay then using the provided cables to connect your drives to the RAID controller and the RAID controller to your motherboard. Run the provided software to establish the mirror and you're done. No need for special drivers, no interrupt or software conflicts!
Features & Benefits
- Operating system and platform independence
- No need for IRQs, TSRs or
device drivers
- Quick and easy installation - Fits into any
3.5" drive bay
- Supports one pair of Serial ATA hard disk
drives (primary & mirror)
- Both drives in the array are independently bootable
- If one drive fails, the remaining drive assumes control
- Readily accessible front panel alerts: audible alarm and visual
LEDs
- Easy-to-use Windows XP/2000/2003Management Utility
- Background rebuild under Windows
- Available mirroring utility for non-Windows systems
- Mirrored drives are both bootable - 100%
data redundancy
- Remote administration/notification
capable
- Serial port for remote administration
(optional)
- Comprehensive log files and reports
- Supports drives up to 144 petabytes
- 48 bit LBA support
| Drive
Interface |
SATA I |
| Data
Path |
SATA I
Defined by host controller |
| Host
Interface |
Standard
20" SATA cable |
| Electrical
Input |
Voltage
5V DC (+/- 5%)
Current
450ma operating, 600ma peak |
| Physical
Dimensions |
Width: 4.00"
Height: 1.00" Depth: 3.70" |
| Operating |
Temperature: 0
- 50°C
Humidity: 8 to 87%
non-condensing |
| MTBF |
MIL-HDBK-217 = 580,383
hours
Bellcore rating = 2,695,418 hours |
| EMC/EMI
Compliance |
FCC class B certification
CE certification |
